A pea gravel patio may be the most affordable way to build your patio. It’s also a good choice if you want something that looks natural and rustic, rather than like it was built by a professional landscaper. Pea gravel is made from crushed stone that is about one-eighth of an inch in diameter. It can be easy to install and maintain, so long as you take care not to step on or drive over any loose stones when they are scattered around your yard after installation.
A pea gravel patio may be the most affordable way to build your patio.
You might be surprised to learn that many people consider a pea gravel patio to be the most affordable way to build your patio. The reason for this is simple: it’s easy to install and doesn’t require any specialized tools or equipment. Also, as you’ll see in our buying guide below, there are plenty of places that sell pre-bagged pea gravel by the cubic yard at low prices.
A pea gravel driveway can also be used for patios and walkways inside your home; however, the installation process will vary depending on the situation (e.g., if you have a lot of trees nearby). If you’re considering doing this yourself but don’t know where to start, we recommend checking out our article on how much does it cost?
Pea gravel is compacted.
Pea gravel is a type of small-sized, rounded stone that makes up the bedding layer of many types of patio. It can be easily compacted by hand or with a vibrating plate compactor. This is advantageous because it creates a sturdy base for your patio’s surface material and helps the patio stay level.
The size range for pea gravel is 0.5 to 2 inches in diameter, but most commonly sold in 1/4 inch increments. Pea gravel has been around for quite some time and has many advantages over other types of paving stones such as concrete or pavers:
It can be easier to install and maintain than other types of patios.
Pea gravel patios are easy to install and maintain. You can do it yourself, which is a bonus if you’re on a tight budget or don’t have any construction experience.
If you need help installing your patio, hire someone who has experience with this type of project. To get started on your own, pick up some pea gravel stones at your local home store or hardware store and follow these instructions:
- Create an outline of where the patio will go using stakes and string or hose
- Pour concrete into the outline (use a trowel to smooth the top)
- Place the pea gravel stones in between the concrete slabs
It provides a more natural look.
If you’re looking for a more natural look, pea gravel is a great option. It’s made from actual pea-sized rocks and has a rough texture that will add to the authenticity of your space.
It’s not as smooth as other materials like pavers or bricks, which means that if you happen to drop something on your patio—like a glass or plate—it won’t be as likely to chip and break. This also means that it’s not ideal for people with mobility issues who might slip on its surface.
The surface is not incredibly hard, so it may not be ideal for areas with heavy foot traffic or large groups.
Pea gravel is also not a very hard surface. While this is beneficial in terms of aesthetics and drainage, it can be difficult to walk on if your area has heavy foot traffic or you have a large group over for dinner. Additionally, pea gravel is relatively soft and many people find that spills are easier to clean up than on concrete or brick patios.
It’s important to remember that pea gravel does not freeze as hard as other materials used for patios, so there may be some cracks after winter when the temperature rises again. If this concerns you, consider installing a more permanent patio solution like brick or concrete pavers instead!
It can be difficult to clean up spills.
While you don’t have to worry about spills on your patio, it can be difficult to clean up when they do happen. You will need to sweep or hose down the area if you want to get rid of any dirt and debris that has accumulated. If you have a power washer, then this process should go much faster.
You will need to set your patio stones on a bed of sand or gravel.
You will need to set your patio stones on a bed of sand or gravel. This is to provide a stable base for the stones, which are often quite heavy. The stones can be laid directly on the ground but this may not be as stable.
You can create a beautiful patio with pea gravel, but it has its drawbacks.
If you’re looking for an inexpensive, aesthetically pleasing material that is easy to install and clean up, pea gravel may be the right choice for your patio. However, it has some drawbacks: it can be difficult to walk on because of its smooth surface; spills such as stains from orange juice can be a challenge to remove from this material. In addition, if you do not live near a pea gravel supplier then transport costs may add up quickly.
Pea gravel provides a simple, affordable way to create a patio that looks natural and blends into your yard. It’s also easy to install, so if you want something that doesn’t require much maintenance then this might be a good option for you. However, if you want something more permanent or you plan on using it frequently then pea gravel may not be right for your needs. In addition, since pea gravel is easily displaced by human feet or pets running around on top of it then this type of patio may not be the best choice for heavy traffic areas where spills are common occurrences (like children’s playrooms).